|
Capacitive Level Limit Switch for Bulk Solids
- Adjustment-free commissioning
- Active build-up compensation
- Maintenance-free
- Rope version easy to shorten
Application
The Minicap FTC is suitable for level detection of powdery and fine-grain bulk solids, such as grain, flour, powdered milk, mixed feed, cement, chalk or gypsum – also in dust explosive areas. The Minicap comes in two versions:
Relay output (SPDT) or
PNP output
Function
The Minicap is an electronic switch. When the limit is exceeded or the load falls below the limit, a switching signal is output. A switch housing or signal output device (e.g. lights, horns, programmable logic sequencer, stored program control, etc.) can be connected to the Minicap. It has an in-built switch-over facility for minimum/maximum safety. It detects the formation of deposits on the probe, and compensates for the effects of this so that the switching point is maintained. The Minicap comes with factory settings.
Other sensitivity adjustments can be made on the housing. |
|
